 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 74LVQ151 Low Voltage 8-Input Multiplexer May 1998 74LVQ151 Low Voltage 8-Input Multiplexer General Description The LVQ151 is a high-speed 8-input digital multiplexer. It provides, in one package, the ability to select one line of data from up to eight sources. The LVQ151 can be used as a universal function generator to generate any logic function of four variables. Both true and complementary outputs are provided. Features n Ideal for low power/low noise 3.3V applications n Guaranteed simultaneous switching noise level and dynamic threshold performance n Guaranteed pin-to-pin skew AC performance n Guaranteed incident wave switching into 75 Ordering Code: Order Number 74LVQ151SC 74LVQ151SJ Package Number M16A M16D Package Description 16-Lead (0.150" Wide) Small Outline Integrated Circuit, SOIC JEDEC 16-Lead Molded Small Outline Package, SOIC EIAJ Devices also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering code. Logic Symbols Connection Diagram Pin Assignment SOIC JEDEC and EIAJ DS011351-1 IEEE/IEC DS011351-2 Pin Descriptions Pin Names I0-I7 S0-S2 E DS011351-4 Description Data Inputs Select Inputs Enable Input Data Output Inverted Data Output Z Z (c) 1998 Fairchild Semiconductor Corporation DS011351 www.fairchildsemi.com Truth Table Inputs E H L L L L L L L L S2 X L L L L H H H H S1 X L L H H L L H H S0 X L H L H L H L H Z H I0 I1 I2 I3 I4 I5 I6 I7 Outputs Z L I0 I1 I2 I3 I4 I5 I6 I7 Functional Description The LVQ151 is a logic implementation of a single pole, 8-position switch with the switch position controlled by the state of three Select inputs, S0, S1, S2. Both true and complementary outputs are provided. The Enable input (E) is active LOW. When it is not activated, the complementary output is HIGH and the true output is LOW regardless of all other inputs. The logic function provided at the output is: Z = E * (I0 * S 0 * S 1 * S 2 + I1 * S0 * S 1 * S 2 + I2 * S 0 * S1 * S 2 + I3 * S0 * S1 * S 2 + I4 * S 0 * S 1 * S2 + I5 * S0 * S 1 * S 2 + I6 * S 0 * S1 * S2 + I7 * S0 * S1 * S 2) The LVQ151 provides the ability, in one package to select from eight sources of data or control information. By proper manipulation of the inputs, the LVQ151 can provide any logic function of four variables and its complement. H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Logic Diagram DS011351-5 Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. www.fairchildsemi.com 2 Absolute Maximum Ratings (Note 1) Supply Voltage (VCC) DC Input Diode Current (IIK) VI = -0.5V VI = VCC + 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = -0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current (ICC or IGND) Storage Temperature (TSTG) DC Latch-Up Source or Sink Current -0.5V to +7.0V -20 mA +20 mA -0.5V to VCC + 0.5V -20 mA +20 mA -0.5V to VCC + 0.5V Recommended Operating Conditions (Note 2) Supply Voltage (VCC) Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) Minimum Input Edge Rate (V/t) VIN from 0.8V to 2.0V VCC @ 3.0V 2.0V to 3.6V 0V to VCC 0V to VCC -40C to +85C 125 mV/ns 50 mA 200 mA -65C to +150C 100 mA Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings.The "Recommended Operating Conditions" table will define the conditions for actual device operation. Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol Parameter VCC (V) 3.0 3.0 3.0 3.0 3.0 3.0 3.6 3.6 3.6 3.6 3.3 3.3 3.3 3.3 1.7 1.7 4.0 0.8 -0.8 2.0 0.8 0.002 TA = +25C Typ VIH VIL VOH Minimum High Level Input Voltage Maximum Low Level Input Voltage Minimum High Level Output Voltage 2.99 2.9 2.58 0.1 0.36 2.9 2.48 0.1 0.44 V V V V A mA mA A V V V V 1.5 0.8 0.8 V 1.5 2.0 TA = -40C to +85C Guaranteed Limits 2.0 V VOUT = 0.1V or VCC - 0.1V VOUT = 0.1V or VCC - 0.1V IOUT = -50 A VIN = VIL or VIH (Note 3) IOH = -12 mA VOL Maximum Low Level Output Voltage IOUT = 50 A VIN = VIL or VIH (Note 3) IOL = 12 mA IIN IOLD IOHD ICC VOLP VOLV VIHD VILD Maximum Input Leakage Current Minimum Dynamic Output Current (Note 4) Maximum Quiescent Supply Current Quiet Output Maximum Dynamic VOL Quiet Output Minimum Dynamic VOL Maximum High Level Dynamic Input Voltage Maximum Low Level Dynamic Input Voltage Note 3: All outputs loaded; thresholds on input associated with output under test. Note 4: Maximum test duration 2.0 ms, one output loaded at a time. Note 5: Incident wave switching on transmission lines with impedances as low as 75 for commercial temperature range is guaranteed for 74LVQ. Note 6: Worst case package. Note 7: Max number of outputs defined as (n). Data inputs are driven 0V to 3.3V; one output at GND. Note 8: Max number of Data Inputs (n) switching. (n - 1) inputs switching 0V to 3.3V. Input-under-test switching: 3.3V to threshold (VILD), 0V to threshold (VIHD), f = 1 MHz. Units Conditions 0.1 1.0 36 -25 40.0 VI = VCC, GND VOLD = 0.8V Max (Note 5) VOHD = 2.0V (Note 5) VIN = VCC or GND (Notes 6, 7) (Notes 6, 7) (Notes 6, 8) (Notes 6, 8) 3 www.fairchildsemi.com AC Electrical Characteristics TA = +25C CL = 50 pF Min tPLH tPHL tPLH tPHL tPLH tPHL tOSHL tOSLH Propagation Delay Sn to Z or Z Propagation Delay Sn to Z or Z Propagation Delay E to Z or Z Propagation Delay E to Z or Z Propagation Delay In to Z or Z Propagation Delay In to Z or Z Output to Output Skew (Note 9) Data to Output 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 3.0 3.0 2.5 2.5 2.5 2.5 1.5 1.5 2.5 2.5 2.5 2.5 Typ 13.8 11.5 14.4 12.0 9.6 8.0 10.2 8.5 11.4 9.5 11.4 9.5 1.0 1.0 Max 25.3 18.0 25.3 18.0 18.3 13.0 18.3 13.0 19.7 14.0 21.1 15.0 1.5 1.5 TA = -40C to +85C CL = 50 pF Min 3.0 3.0 2.5 2.5 2.0 2.0 1.5 1.5 2.0 2.0 2.0 2.0 Max 28.0 20.0 28.0 20.0 20.0 14.0 20.0 14.0 22.0 15.5 23.0 16.0 1.5 1.5 ns ns ns ns ns ns ns Symbol Parameter VCC (V) Units Note 9: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH to LOW (tOSHL) or LOW to HIGH (tOSLH). Parameter guaranteed by design. Capacitance Symbol CIN CPD (Note 10) Parameter Input Capacitance Power Dissipation Capacitance Note 10: CPD is measured at 10 MHz. Typ 4.5 45 Units pF pF Conditions VCC = Open VCC = 3.3V www.fairchildsemi.com 4 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead (0.150" Wide) Small Outline Integrated Circuit, SOIC JEDEC Package Number M16A 16-Lead Molded Small Outline Package, SOIC EIAJ Package Number M16D 5 www.fairchildsemi.com 74LVQ151 Low Voltage 8-Input Multiplexer LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and (c) whose device or system, or to affect its safety or effectiveness. failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. Fairchild Semiconductor Corporation Americas Customer Response Center Tel: 1-888-522-5372 Fax: 972-910-8036 Fairchild Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 8 141-35-0 English Tel: +44 (0) 1 793-85-68-56 Italy Tel: +39 (0) 2 57 5631 Fairchild Semiconductor Hong Kong Ltd. 8/F Room 808 Empire Centre 68 Mody Road, Tsimshatsui East Kowloon, Hong Kong Tel: 852-2722-8338 Fax: 852-2722-8383 Fairchild Semiconductor Japan Ltd. 4F, Natsume BI, 2-18-6 Yushima, Bunkyo-ku, Tokyo 113-0034, Japan Tel: 81-3-3818-8840 Fax: 81-3-3818-8450 www.fairchildsemi.com Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. |
Price & Availability of 74LVQ151SC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |